What engineering units can I convert?

We support a wide array of specialized engineering units including Pascal for stress, Newton-meters for torque, kg/m³ for density, and rad/s² for angular acceleration.

Are these tools suitable for professional engineering use?

Absolutely. We use standard SI and imperial engineering conversion factors. However, for critical structural calculations, we always recommend verifying final values against your project's specific safety standards.

How do I convert torque units like lb-ft to Nm?

Simply select the Torque Calculation Converter, choose your input unit (e.g., pound-feet), enter the value, and select Newton-meters as the output. The conversion factor (1 lb-ft ≈ 1.3558 Nm) is applied instantly.

Is moment of inertia supported?

Yes, our moment of inertia converter supports mass-based rotational inertia units like kg·m², g·cm², and lb·ft².

15 converters

Engineering Unit Converters

Specialized converters for engineering calculations including density, torque, stress, and angular velocity. Explore accurate converters for this category with direct access to every tool.

Tools in this category

All tools

Density Measurement ConverterConvert density units including kg/m³, g/cm³, lb/ft³, and lb/in³. Essential for engineering and material science calculations. Ideal for materials scientists, engineers, and technicians.Torque Calculation ConverterConvert torque units including Newton-meters, pound-feet, pound-inches, and kilogram-force meters. Ideal for mechanical engineers, technicians, and students.Angular Acceleration ConverterConvert angular acceleration units including rad/s², deg/s², and rev/s². Used in rotational dynamics and motor engineering. Ideal for mechanical engineers, technicians, and students.Stress and Strain ConverterConvert stress units including Pascal, MPa, GPa, PSI, ksi, and bar. Essential for structural and mechanical engineering. Ideal for structural engineers, mechanics, and technicians.Moment of Inertia ConverterConvert moment of inertia units including kg·m², g·cm², lb·ft², and lb·in². Used in rotational mechanics and machine design. Ideal for mechanical engineers, technicians, and students.Angular Velocity ConverterConvert angular velocity units including rad/s, deg/s, RPM, and rev/min. Used in motor and rotational system engineering. Ideal for mechanical engineers, technicians, and students.Moment of Force ConverterConvert moment of force units including N·m, kN·m, lbf·ft, and kgf·m. Used in structural and mechanical engineering. Ideal for mechanical engineers, technicians, and students.Specific Volume ConverterConvert specific volume units including m³/kg, cm³/g, ft³/lb, and L/kg. Used in thermodynamics and fluid engineering. Ideal for materials scientists, engineers, and technicians.Acceleration ConverterConvert acceleration units including m/s², ft/s², g-force, Gal, and cm/s². Used in physics and mechanical engineering. Ideal for mechanical engineers, technicians, and students.Pressure Unit ConverterConvert pressure units including PSI, pascal, bar, atm, torr, and inHg instantly - base pascal calculations, no signup. Ideal for HVAC techs, hydraulic engineers, and lab work.Force Unit ConverterConvert force units including newton, kilonewton, pound-force, dyne, and kgf instantly - SI and imperial units, no signup. Ideal for structural engineers, mechanics, and physics students.Power Unit ConverterConvert power units including watts, kilowatts, horsepower, BTU/hr, dBm, and milliwatts instantly - with logarithmic dBm handling, no signup. Ideal for electricians, HVAC designers, and RF engineers.Energy Unit ConverterConvert energy units including joules, kilowatt-hours, calories, BTU, electron-volts, and ergs instantly - scientific and utility units, no signup. Ideal for thermodynamics students, energy analysts, and HVAC work.Work Unit ConverterConvert work and energy units including joules, foot-pounds, BTU, calories, and kilowatt-hours instantly - mechanical work units, no signup. Ideal for mechanics, physics students, and machine design.Length per Unit Length ConverterConvert length-per-unit-length strain values between m/m, mm/m, in/in, ppm, percent, and microstrain instantly - dimensionless strain units, no signup. Ideal for materials engineers, strain gauge work, and structural testing.

About Engineering Unit Converters

Engineering Unit Converters are designed specifically for mechanical, civil, and structural engineers who require absolute precision. From calculating moment of inertia to converting angular acceleration and stress values, these tools eliminate manual calculation errors in critical design phases.

Professionals dealing with material science, construction, or rotational dynamics will find our torque and density converters invaluable. Every formula used in these tools adheres to standard engineering practices, ensuring that whether you are working with Pascals, Newton-meters, or rad/s², your results are reliable and instantaneous.

Frequently Asked Questions

Need another converter?

Browse the full index to find converters across measurement, engineering, electricity, heat, fluids, optics, and more.

Browse all tools